Wednesday, January 16, 2013

New Years Resolutions...

PIGEONWOBBLE.GIF
And then the sun came out and melted all the snow away, long enough to turn the trails into a muddy morass,  before the temperatures dropped back down into the single digits, freezing ruts, footprints, and what snow-ice remained into hard ugly stuff.  But dry ugly stuff, and that's conditions enough for the Pigeon to come out of  hibernation and get me to work.  Single speed still feels achingly more efficient and connected than any of  my hub gear bikes.

I was gifted a Garmin Edge 200 GPS bike computer for the holidays, and I love it. No wires or anything, just turn it on, and it picks up the satellites in 10 seconds, and provides climb, average speed, speed, odometer, all of that stuff. It came with two mounts, so I can just stick it on whichever bike, or even just keep it in my pocket, as I ride, so the miles add up.  I really just care about the odometer...

So my resolution is try and do 1000 miles before RAGBRAI.  And hopefully if conditions permit, to attend that ride, and bike across the merry land of Iowa, self supported. (excepting water and food of course)  This shouldn't be too hard.

Last year, my resolution was to do 500 miles.  I picked 500 because it seemed big and impressive but not unobtainable. I honestly had no idea just how much riding I would be doing, I had only gotten a simple wired cateye computer on the Felt, and had put 124 miles on it before January 2012.   I rode 2012 with the Cateye only on the Felt, and missed counting any of my Flying Pigeon or Kruisframe miles.  I made 624 miles on the Felt alone by August or so.  On the Pigeon and Kruisframe, I made five or six 50+ mile trips, and lots more regular commuting.  So I'm thinking I probably ended up towards 1500 miles, casually.

I just want to make sure I can string 80 mile days back to back and enjoy myself.  Pack light and just go. 

Wednesday, January 2, 2013

Snow Studded Commute



Thursday morning I was greeted with the fact that my car wasn't starting, probably ice in the fuel lines or similar.  I dashed back into the house, and changed my clothing entirely to wool, pulled out the Felt and rode into work, braving the ice and snow again.

This really got me interested in studded bicycle tires, particularly since some of the commute had me going down streets that consisted of nothing but compacted sheet ice, two inches thick. Scary.

I checked my LBSs prices on studded tires, then checked Amazon's. There was a not discountable difference, I could get them for half the price from Niagra Cycles. (before shipping).  But my LBS is 200 yards from my workplace, and I could get the tires and have them put on the bike over lunch.  That was just too convenient.

Local Bike Shop for the win. I rode up, and of course being the middle of winter, they had no shop backlog, had the tires, and were able to put them on in about 20 minutes -  the time it took for me to eat lunch at the McDonalds across the street.  (yech)

The 45North Polara tires immediately turned even the worst offending sheet ice into entirely manageable surfaces, and improved purchase in snow and mush additionally. When I would skid or break one of the wheels loose, the rate of slipping was consistent and easy to counter. It made a hilarious difference. So much so that rather than carpool on Friday, I biked to work again.  The rolling resistance is maybe 15-20% higher, but heck that's just exercise.

All of this also has me extremely enamored of my Felt Cafe 3 again.  Light, simple and versatile. What a great catch-all bike.


Wednesday, December 26, 2012

Cable-tie snow chains.

... somewhere on the web I saw this technique of banding bicycle tires with cable ties / zip ties, to provide extra friction and control-ability in snow and ice.   I believe the practice started in the Pacific Northwest, but I'm not positive.  

I decided to try this out on the rear wheel of my Felt3, starting Christmas Eve. When I got back home after a short 5 mile circuit, I noticed I was short a few cable ties.   Well today I commuted by bike, and ended up picking up most of the cable-ties I shed on Christmas Eve.  Don't want to litter, and all that.   By the time I was at work, I had shed all but three or four out of 30 something.

Upon examination of the broken cable ties, they had failed not at the zip-locking mechanism, but had snapped clean in the center of their bands, where they were being overridden by the tire itself.

Seems that while cable ties might stand up to the somewhat warmer winters of the PacNW,  the plastic becomes embrittled quickly in the 10F and below temperatures of the north-central midwest.  Ping!

I haven't really noticed a degradation in performance without the ties. The bike handles about as well as you'd expect on stretches of compressed snow or compacted ice sheet. Which is to say, marginal. :)

Tuesday, December 25, 2012

Snow Bike Lantern

snowy woods

This was actually my first time riding in the snow, but it was quite fine. I've been a little lazy in getting up early enough to commute by bike into work. I decided to course the trails on Christmas Eve. Temperatures was around 11F or so.  Merino thermals, denim overalls,  key shirt, wool sweater, amana wool scarf, wool earflap cap, wool gloves, and the waxed pointer chore coat.  Hiking boots, wool socks.  Stayed plenty warm.   

The Felt Cafe3 makes a pretty good snow bike. Nexus 3 IGH with coaster brake, keeps the drivetrain closed up and simple, no packing snow into derailleurs.  The other plus, is the aluminum frame sidesteps corrosion concerns.    One nice thing about living on the frigid plains, is that when we do get snow, it is dry and powdery, while you do get thick drifts, it generally is only lightly covering regular flat surfaces, and consequently does not get too deep.  With close fitting fenders, V brakes, and tight fits at the seat and chain-stays, this bike would not well tolerate a thick wet lake-effect snow.   Aluminum also makes it easy to portage over deep drifts. Cyclo-cross style.   This would be awkward with the Flying Pigeon, or all but impossible with the Kruisframe. 

Once I got off the streets and onto the trail, I turned off all the blinkies, Cygolight, and lit my dietz kerosine lantern. This is one of the cold-blast models and produces a suprising amount of light. It is easy to grip both the lamp and the handlebars with enough 'give' to prevent the lamp from being overly-jostled. 

I then cycled the upper length of the trail, making the rounds, lighting the snowy woods, and the crunch of snow underneath the tires.  Very fun!   Hopefully everyone is having a good holiday season! 

Tuesday, December 4, 2012

Persistence of Pigeon

Just sort of touching base, but I continue to ride my PA-02 Flying Pigeon more than my other bicycles, and the more I do, the more I am aware of  how oddly "right" it feels.  I was considering putting on a three speed IGH hub in the back, but now I'm not so sure. According to Sheldon Brown's Gear inch calculator, I'm running around 56" and basically I climb on the bike and go.  My daily commute features a few gradual hills, and one steep 20% grade climb 50 feet up onto a former railroad embankment.   I'm not out of the seat for this.
Sunflowers from the backyard - back in September. Actually this is kind of neat:   They were last planted three years ago.  Now the chipmunks have them coming up all over the place. 
Admittedly I top out at a pokey 13mph, at a comfortable spin, but on the miles of crushed limestone trails, and suburban back streets this speed feels entirely fine.  The responsiveness of the single speed drive train is terrific. Or, maybe it just feels natural?   In comparison, the Nexus Inter 3 on my Felt Cafe, and Nexus 8 on my Workcycles/Azor Kruisframe feel lethargic, disconnected and full of friction.

When I got the Pigeon, I repacked the wheel bearings out of curiosity of the process when I was assembling, it, and waiting for other parts to arrive. I also later upgraded to the 20 tooth 3 pawl BMX freewheel.  Now the wheel is tight in the stays and on the bearings, no slop - but I can spin it with one stroke by hand, and it keeps going for almost a minute Neither of my IGH bikes can do this.

There is some sort of mystic British Raleigh Perfection here even when executed as a Chinese knockoff.

Not that the Pigeon is entirely trouble free - Yesterday evening, before my ride home I checked the crank tightness, and found that the cotter on one was  a bit loose and notchy. (I had dismissed it as the slightly crummy MKS 3000 pedals)   I rode it home carefully and then hammered the cotter in with a few good whacks, seating it further and tightened the cotter nut. Problem solved.  Also, I finally found 5mm hex head screws to replace the nearly stripped originals for the rod-brake clips at the local hardware store.

So I'm thinking about simplifying the Kruisframe a good bit, maybe try the very efficient SRAM automatix 2 speed hub on it, strip the bike down a little bit.

It is interesting, how perceptions change with experience.  I was thinking about getting a 10 speed-ish road bike next year, possibly to do Ragbrai with, and then a few months later, I was thinking about just 3 speeding it with a front derailleur and Paul Melvin tensioner...     now I'm realizing that I can just go all day on a single speed.

Monday, October 29, 2012

Cheap and made in America Shell Coat


I've mentioned this in a few other postings, and with the weather finally getting down into the 30s, I figure it is time to address my DIY shell coat.  

This is pretty simple really.  

Take one Pointer Brand Chore Coat.  Which is a made in the USA simple single layer cotton denim coat, with some pockets. You could probably substitute with any other similar cotton garment. 

Then take one bar of Otter Wax, waterproofing wax. 

Apply wax to the coat liberally, on a concrete patio, on a warm summer day.  Maybe when you're done just toss it in a old pillow-case and run it around in the dryer on low. Or let it be warmed by the sun some more. 

The result is an impressively smelly, waxy cotton chore coat. It also outright blocks wind from penetrating, and it is not overly bulky. The water resistance isn't spectacular. It keeps light stuff at bay. Having a wool layer on underneath will limit soak-through. 

On last Friday's morning commute, it was 34, and I wore a wool guide shirt, and wool sweater, and the wind was just coming right through.  I warmed up after the first mile, but it was kind of unpleasant all the way to work. That evening, I rode home after dark, and it was back down to 34, with a gusty breeze.  This time I wore the chore coat out. The wind did not get through the coat at all, and I quickly became nice and toasty, and had a tremendously great ride home.

 I think, as long as I'm actively biking, with two wool layers on underneath, I should be good down into the tens or so. 

When this coat isn't in use, it is strapped to the top of  my Carradice or Zimbale bags. It does make a nice impromptu ground cloth, for maintenance, or napping on, etc. 

Tuesday, October 2, 2012

Near miss venting.

Maybe I should've gone after her, yelled at her or something. Stupid lady in her minivan turning oncoming in front of me, just so she could get to her freaking parking spot at Target.  

I was fine, no contact was made, but it was disconcerting. I was commuting home on the Flying Pigeon when it happened. I had a light on.  I was doing everything right, yet still nearly got hit because of a stupid self important driver.

The rod brakes on the Pigeon aren't bad, but they're still  less effective than a coaster or good caliper brakes, I nailed them hard as I decelerated and though they're fine when I'm using them to modulate my speed, they seem to lack a little bit for panic stopping because of stupid drivers.   Might be time to rebuild the rear wheel around a coaster brake.